CE-4008Q-5V15A
Highly accurate 4-range tester, master of detail and realism. Current ranges of 5mA~300mA, 30mA~3A, 60mA~6A, and 150mA~15A can be selected to realize the controllable accuracy of small current in small range.
Quantity
Key Highlights
8 independent channels
Voltage range: 0.025–5 V
Current range: 5 mA–15 A
4 selectable current ranges
Voltage & current accuracy: ±0.05% F.S.
Voltage & current stability: 0.1% F.S.
10 Hz recording frequency
100 ms sampling time
Current response time: ≤1 ms
>65% energy efficiency
1 GB offline testing
Up to 254 programmable work-step lines
Supports Cycle Life, Rate Charge/Discharge, Pulse Simulation, GITT, DCIR, and dQ/dV
The energy feedback system can recover energy generated during battery discharge
Compact 2U design
Multiple units can be assembled for larger-scale testing
Supports auxiliary voltage, temperature, and environmental test chambers
Description
The NEWARE CE-4008Q-5V15A is an 8-channel battery testing system designed for precise charge/discharge testing and performance evaluation of battery cells and energy storage devices. Each channel provides independent data acquisition and programming, allowing multiple batteries to be tested simultaneously under different conditions. The system provides four selectable current ranges from 5 mA to 15 A, allowing researchers to select an appropriate measurement range according to the testing requirements. The available ranges are 5 mA–300 mA, 30 mA–3 A, 60 mA–6 A, and 150 mA–15 A, providing greater control over measurement accuracy when working with different current levels. A key feature of the CE-4008Q-5V15A is its energy feedback capability. Energy generated during battery discharge can be recovered and redistributed to other battery channels or fed back to the internal power grid, with the system specified at >65% energy efficiency. The CE-4008Q-5V15A also supports advanced battery testing methods, including GITT, DCIR, pulse simulation, cycle-life testing, rate charge/discharge, and dQ/dV analysis, making it suitable for battery research as well as routine cell characterization and performance testing.
Specifications
Parameter | Specification |
Equipment Name | CE-4000 Battery Testing System |
Model | CE-4008Q-5V15A |
Number of Channels | 8 channels |
Channel Operation | Independent data acquisition & programming |
Input Power Supply | AC 220 V ±10%, 50 Hz |
Input Active Power | 0.68 kW |
AD Resolution | 24-bit |
DA Resolution | 16-bit |
Input Impedance | ≥1 MΩ |
Constant Voltage Range | 0.025–5 V |
Minimum Discharge Voltage | 1.5 V (2 m cable length) |
Voltage Accuracy | ±0.05% F.S. |
Voltage Stability | 0.1% F.S. |
Current Range 1 | 5 mA–300 mA |
Current Range 2 | 30 mA–3 A |
Current Range 3 | 60 mA–6 A |
Current Range 4 | 150 mA–15 A |
Current Accuracy | ±0.05% F.S. |
Current Stability | 0.1% F.S. |
Recording Frequency | 10 Hz |
Sampling Time | 100 ms |
Current Response Time | ≤1 ms |
Energy Efficiency | >65% |
Offline Test Storage | 1 GB |
Programmable Work Steps | Up to 254 editable lines |
Design | 2U modular |
F.S. = Full Scale. Specifications are based on the current NEWARE product page.
Application
The CE-4008Q-5V15A is suitable for:
Battery Cell Testing
Rechargeable Battery Testing
Consumer Electronics
Laptop & Tablet Batteries
Communication Device Batteries
Battery Materials Research
Solid-State Battery Research
Cycle Life Testing
Rate Charge / Discharge Testing
GITT
DCIR Testing
Pulse Simulation
dQ/dV Differential Capacity Analysis
Battery Performance Evaluation
NEWARE specifically identifies this model for laptop and tablet batteries, consumer electronics, and communication applications, while the product itself supports broader battery testing and research workflows.