CE-4008Q-5V30A
Highly accurate 4-range tester, master of detail realism. Battery test equipment for DCIR and GITT test. Up to 5V, 30A, testing up to 80 batteries simultaneously.
Quantity
Key Highlights
8 independent channels
Constant voltage range: 0.025–5 V
Maximum current: 30 A/channel
4 selectable current ranges
Voltage & current accuracy: ±0.05% F.S.
Voltage & current stability: 0.1% F.S.
10 Hz recording frequency
100 ms sampling time
Current response time: ≤1 ms
>65% energy efficiency
1 GB offline testing
Up to 254 programmable work-step lines
Supports Cycle Life, Rate Charging/Discharging, Pulse Simulation, GITT, DCIR, and dQ/dV
Energy feedback recovers energy generated during battery discharge
3U modular design
Multiple units can be assembled into a larger battery testing system
Supports Auxiliary Voltage, Auxiliary Temperature, and Environmental Test Chambers
Description
The NEWARE CE-4008Q-5V30A is an 8-channel battery testing system designed for high-current battery characterization and charge/discharge testing. Each channel operates independently for data acquisition and programming, allowing multiple batteries to be tested simultaneously under different conditions. The system provides four selectable current ranges from 5 mA to 30 A: 5 mA–1 A, 30 mA–6 A, 60 mA–12 A, and 150 mA–30 A. This range-switching architecture allows researchers to select a suitable current range according to the test requirements and improve controllable accuracy when measuring smaller currents. A key feature of the CE-4008Q-5V30A is its energy feedback system. Energy generated during battery discharge can be recovered and redistributed to other battery channels or fed back to the internal power grid. NEWARE specifies an energy efficiency of >65%. The system supports advanced battery testing methods, including GITT, DCIR, pulse simulation, cycle-life testing, rate charging/discharging, and dQ/dV analysis. It also supports DBC configuration, CC/CV charge/discharge testing, segmented recording, and integration with auxiliary measurement and environmental equipment.
Specifications
Parameter | Specification |
Equipment Name | CE-4000 Battery Testing System |
Model | CE-4008Q-5V30A |
Number of Channels | 8 channels |
Channel Operation | Independent data acquisition & programming |
Input Power Supply | AC 220 V ±10%, 50 Hz |
Input Active Power | 1.71 kW |
AD Resolution | 24-bit |
DA Resolution | 16-bit |
Input Impedance | ≥1 MΩ |
Constant Voltage Range | 0.025–5 V |
Minimum Discharge Voltage | 1.5 V with 2 m cable |
Voltage Accuracy | ±0.05% F.S. |
Voltage Stability | 0.1% F.S. |
Current Range 1 | 5 mA–1 A |
Current Range 2 | 30 mA–6 A |
Current Range 3 | 60 mA–12 A |
Current Range 4 | 150 mA–30 A |
Current Accuracy | ±0.05% F.S. |
Current Stability | 0.1% F.S. |
CV Cut-off Current | 5 mA / 30 mA / 60 mA / 150 mA |
Recording Frequency | 10 Hz |
Sampling Time | 100 ms |
Current Response Time | ≤1 ms |
Energy Efficiency | >65% |
Offline Test Storage | 1 GB |
Programmable Work Steps | Up to 254 editable lines |
Design | 3U modular |
F.S. = Full Scale. Specifications are based on NEWARE's current product page.
Application
The CE-4008Q-5V30A is suitable for:
Battery Cell Testing
Rechargeable Battery Testing
Laptop & Tablet Batteries
Electric Transportation Batteries
Electric Bicycle Batteries
Battery Materials Research
Solid-State Battery Research
Cycle Life Testing
Rate Charging / Discharging
GITT (Galvanostatic Intermittent Titration Technique)
DCIR Testing
Pulse Simulation
dQ/dV Differential Capacity Analysis
Battery Performance Evaluation
NEWARE specifically lists laptop and tablet batteries, electric transportation batteries, and electric bicycles as application areas for this model.