CE-5008Q-20V30A-SMB-DS

• 8 independent testing channels

• Voltage output range: 2.5–20 V

• Current output up to 30 A

• 4 selectable current ranges: 0.03 A, 0.3 A, 3 A, and 30 A

• Voltage and current accuracy: ±0.02% F.S.

• 600 W output power per channel

• Current response time: ≤30 ms

• 100 Hz synchronous data acquisition

• 16-bit AD/DA resolution

• Supports CC, CV, CC-CV, and pulse charge/discharge

• SMBus / I²C protocol parsing

• Supports custom DBC configuration

• Reads smart battery parameters such as SOC, SOH, and temperature

• Four-wire measurement to reduce lead-resistance errors

• Built-in PC for standalone operation

• Remote monitoring and operation

• Up to 255 cycles per test

• Suitable for batteries used in laptops, drones, and power tools

The NEWARE CE-5008Q-20V30A-SMB-DS is an 8-channel battery testing system designed for high-precision performance evaluation and smart battery testing. It combines battery charge/discharge testing with SMBus/I²C communication, allowing users to monitor both electrical performance and battery management data during testing. The system provides a voltage range of 2.5–20 V and four selectable current ranges from 30 mA to 30 A, enabling testing from low-current conditions to high-current load profiles. With ±0.02% F.S. voltage and current accuracy, 100 Hz data acquisition, and a current response time of ≤30 ms, it can capture battery performance and dynamic changes during charge and discharge. A key feature is its SMBus/I²C protocol parsing capability. The system can communicate with Smart Batteries and read battery information and real-time data, including parameters such as SOC, SOH, and temperature. Custom DBC configuration can also be used to decode battery communication data and identify abnormal signals during testing. The system also integrates a PC directly into the test equipment rack, allowing standalone operation without requiring a separate external computer. This helps reduce laboratory space requirements, simplify wiring, and support remote monitoring and operation.

Battery Testing

Data Recording

Communication & Smart Battery Testing

Laptop & Tablet Battery Testing

Suitable for testing rechargeable batteries used in laptops and tablets, including Smart Battery communication and performance evaluation.

Drone Battery Testing

Supports charge/discharge and dynamic load testing for batteries used in drones.

Power Tool Battery Testing

Suitable for battery performance evaluation of cordless power tools and other portable equipment.

Smart Battery Testing

SMBus/I²C communication enables simultaneous evaluation of battery electrical performance and internal battery-management data.

Battery Aging & Cycle-Life Testing

Supports repeated charge/discharge cycles for evaluating battery degradation and long-term performance.

Battery Performance Characterization

Suitable for capacity, charging/discharging behavior, dynamic response, and battery health evaluation.

NEWARE also lists the CE-5008Q-20V30A-SMB-DS within its Battery Cell Test and Electric Tools application categories.