CE-6000-Pro Cell Testing System
Performance of the Power Cell Testing System has been comprehensively upgraded, setting a new benchmark for testing standards. Delivering an entirely new testing experience for power battery R&D and manufacturing.
Quantity
Key Highlights
Ultimate Accuracy: ±0.02% F.S.
Ultra-Fast Response: ≤ 1ms
High-Frequency Sampling: 200Hz
Description
The NEWARE CE-6000-Pro Cell Testing System is a high-power battery testing platform designed for power cell, electric vehicle, electric transportation, and energy storage battery testing. It is the upgraded version of the CE-6000 series, offering improved measurement accuracy, faster response, higher-frequency data acquisition, and shorter pulse widths for more demanding battery testing applications. The system provides ±0.02% F.S. voltage and current accuracy with 24-bit resolution. Compared with the previous CE-6000 generation, recording frequency is increased from 100 Hz to 200 Hz, current response time is reduced from ≤3 ms to ≤1 ms, current conversion time from ≤6 ms to ≤2 ms, and minimum pulse width from 100 ms to 10 ms. These improvements allow the system to capture fast changes in battery current and power more effectively. The CE-6000-Pro supports configurations covering 75 A to 3,600 A, with both 5 V and 6 V versions listed by NEWARE. The specific technical configuration shown on the product page is CE-6006-Pro-6V1200A, providing 0–6 V charging, 1.5–6 V discharge, up to 1,200 A, 7.2 kW per channel, and 43.2 kW total machine output. For advanced battery testing, the system supports CC/CV charge-discharge, 10 ms pulse testing, driving simulation, and DBC-based BMS communication. It also features energy feedback with a maximum efficiency of 75%, allowing discharge energy to be recovered and redistributed to other channels or fed back to the internal power grid.
Specifications
Parameter | Specification |
Series | CE-6000-Pro |
Product Type | Power Cell Testing System |
Voltage Configurations | 5 V / 6 V |
Current Configurations | 75 A / 150 A / 300 A / 600 A / 1,200 A / 1,500 A / 2,400 A / 3,600 A |
Voltage & Current Accuracy | ±0.02% F.S. |
Resolution | 24 bit |
Recording Frequency | 200 Hz |
Current Response Time | ≤1 ms |
Current Conversion Time | ≤2 ms |
Minimum Pulse Width / Work Step | 10 ms |
Maximum Feedback Efficiency | 75% |
Communication | Ethernet / TCP-IP |
Optional Communication | CAN / RS485 |
BMS Communication | DBC configuration |
Driving Simulation | Up to 1 million lines |
Control Modes | CC / CV |
Energy Feedback | Supported |
Application
Power Battery & EV Testing
Electric vehicle battery testing
Power cell characterization
Electric transportation battery
EV battery performance evaluation
Battery pack testing
Energy Storage
Energy storage battery testing
High-power charge/discharge testing
Long-duration battery testing
Energy efficiency evaluation
Battery performance validation
Dynamic Battery Testing
Pulse charge/discharge
High-current transient testing
Driving condition simulation
Dynamic current/power testing
Battery response characterization
BMS & System Testing
BMS communication testing
CAN / RS485 communication
DBC-based testing
Battery pack debugging
Auxiliary voltage and temperature monitoring
Environmental condition testing
NEWARE specifically associates the CE-6000-Pro with electric vehicle parameter assessment, electric transportation batteries, electric vehicles, and electric energy storage. The broader CE-6000 platform is also positioned for power-cell testing and simulation of operating conditions.